Enum wayland_client::protocol::wl_keyboard::Event

source ·
#[non_exhaustive]
pub enum Event { Keymap { format: WEnum<KeymapFormat>, fd: OwnedFd, size: u32, }, Enter { serial: u32, surface: WlSurface, keys: Vec<u8>, }, Leave { serial: u32, surface: WlSurface, }, Key { serial: u32, time: u32, key: u32, state: WEnum<KeyState>, }, Modifiers { serial: u32, mods_depressed: u32, mods_latched: u32, mods_locked: u32, group: u32, }, RepeatInfo { rate: i32, delay: i32, }, }

Variants (Non-exhaustive)§

This enum is marked as non-exhaustive
Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.
§

Keymap

keyboard mapping

This event provides a file descriptor to the client which can be memory-mapped in read-only mode to provide a keyboard mapping description.

From version 7 onwards, the fd must be mapped with MAP_PRIVATE by the recipient, as MAP_SHARED may fail.

Fields

§format: WEnum<KeymapFormat>

keymap format

§fd: OwnedFd

keymap file descriptor

§size: u32

keymap size, in bytes

§

Enter

enter event

Notification that this seat’s keyboard focus is on a certain surface.

The compositor must send the wl_keyboard.modifiers event after this event.

Fields

§serial: u32

serial number of the enter event

§surface: WlSurface

surface gaining keyboard focus

§keys: Vec<u8>

the currently pressed keys

§

Leave

leave event

Notification that this seat’s keyboard focus is no longer on a certain surface.

The leave notification is sent before the enter notification for the new focus.

After this event client must assume that all keys, including modifiers, are lifted and also it must stop key repeating if there’s some going on.

Fields

§serial: u32

serial number of the leave event

§surface: WlSurface

surface that lost keyboard focus

§

Key

key event

A key was pressed or released. The time argument is a timestamp with millisecond granularity, with an undefined base.

The key is a platform-specific key code that can be interpreted by feeding it to the keyboard mapping (see the keymap event).

If this event produces a change in modifiers, then the resulting wl_keyboard.modifiers event must be sent after this event.

Fields

§serial: u32

serial number of the key event

§time: u32

timestamp with millisecond granularity

§key: u32

key that produced the event

§state: WEnum<KeyState>

physical state of the key

§

Modifiers

modifier and group state

Notifies clients that the modifier and/or group state has changed, and it should update its local state.

Fields

§serial: u32

serial number of the modifiers event

§mods_depressed: u32

depressed modifiers

§mods_latched: u32

latched modifiers

§mods_locked: u32

locked modifiers

§group: u32

keyboard layout

§

RepeatInfo

repeat rate and delay

Informs the client about the keyboard’s repeat rate and delay.

This event is sent as soon as the wl_keyboard object has been created, and is guaranteed to be received by the client before any key press event.

Negative values for either rate or delay are illegal. A rate of zero will disable any repeating (regardless of the value of delay).

This event can be sent later on as well with a new value if necessary, so clients should continue listening for the event past the creation of wl_keyboard.

Only available since version 4 of the interface

Fields

§rate: i32

the rate of repeating keys in characters per second

§delay: i32

delay in milliseconds since key down until repeating starts

Implementations§

source§

impl Event

source

pub fn opcode(&self) -> u16

Get the opcode number of this message

Trait Implementations§

source§

impl Debug for Event

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

§

impl Freeze for Event

§

impl !RefUnwindSafe for Event

§

impl Send for Event

§

impl Sync for Event

§

impl Unpin for Event

§

impl !UnwindSafe for Event

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> Downcast for T
where T: Any,

source§

fn into_any(self: Box<T>) -> Box<dyn Any>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
source§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
source§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
source§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
source§

impl<T> DowncastSync for T
where T: Any + Send + Sync,

source§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Send + Sync>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.